00001 /*---------------------------------------------------------------------------*\ 00002 ========= | 00003 \\ / F ield | OpenFOAM: The Open Source CFD Toolbox 00004 \\ / O peration | 00005 \\ / A nd | Copyright (C) 1991-2010 OpenCFD Ltd. 00006 \\/ M anipulation | 00007 ------------------------------------------------------------------------------- 00008 License 00009 This file is part of OpenFOAM. 00010 00011 OpenFOAM is free software: you can redistribute it and/or modify it 00012 under the terms of the GNU General Public License as published by 00013 the Free Software Foundation, either version 3 of the License, or 00014 (at your option) any later version. 00015 00016 OpenFOAM is distributed in the hope that it will be useful, but WITHOUT 00017 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 00018 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 00019 for more details. 00020 00021 You should have received a copy of the GNU General Public License 00022 along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>. 00023 00024 Application 00025 coldEngineFoam 00026 00027 Description 00028 Solver for cold-flow in internal combustion engines. 00029 00030 Usage 00031 - coldEngineFoam [OPTION] 00032 00033 @param -case <dir> \n 00034 Specify the case directory 00035 00036 @param -parallel \n 00037 Run the case in parallel 00038 00039 @param -help \n 00040 Display short usage message 00041 00042 @param -doc \n 00043 Display Doxygen documentation page 00044 00045 @param -srcDoc \n 00046 Display source code 00047 00048 \*---------------------------------------------------------------------------*/ 00049 00050 #include <finiteVolume/fvCFD.H> 00051 #include <engine/engineTime.H> 00052 #include <engine/engineMesh.H> 00053 #include <basicThermophysicalModels/basicPsiThermo.H> 00054 #include <compressibleTurbulenceModel/turbulenceModel.H> 00055 #include <OpenFOAM/OFstream.H> 00056 00057 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // 00058 00059 int main(int argc, char *argv[]) 00060 { 00061 #include <OpenFOAM/setRootCase.H> 00062 00063 #include <engine/createEngineTime.H> 00064 #include <engine/createEngineMesh.H> 00065 #include "createFields.H" 00066 #include <finiteVolume/initContinuityErrs.H> 00067 #include "../engineFoam/readEngineTimeControls.H" 00068 #include <finiteVolume/compressibleCourantNo.H> 00069 #include <finiteVolume/setInitialDeltaT.H> 00070 #include "startSummary.H" 00071 00072 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // 00073 00074 Info<< "\nStarting time loop\n" << endl; 00075 00076 while (runTime.run()) 00077 { 00078 #include <finiteVolume/readPISOControls.H> 00079 #include "../engineFoam/readEngineTimeControls.H" 00080 #include <finiteVolume/compressibleCourantNo.H> 00081 #include <finiteVolume/setDeltaT.H> 00082 00083 runTime++; 00084 00085 Info<< "Crank angle = " << runTime.theta() << " CA-deg" 00086 << endl; 00087 00088 mesh.move(); 00089 00090 #include <finiteVolume/rhoEqn.H> 00091 00092 #include "../engineFoam/UEqn.H" 00093 00094 // --- PISO loop 00095 for (int corr=1; corr<=nCorr; corr++) 00096 { 00097 #include "hEqn.H" 00098 #include "../engineFoam/pEqn.H" 00099 } 00100 00101 turbulence->correct(); 00102 00103 runTime.write(); 00104 00105 #include "logSummary.H" 00106 00107 Info<< "ExecutionTime = " << runTime.elapsedCpuTime() << " s" 00108 << " ClockTime = " << runTime.elapsedClockTime() << " s" 00109 << nl << endl; 00110 } 00111 00112 Info<< "End\n" << endl; 00113 00114 return 0; 00115 } 00116 00117 00118 // ************************ vim: set sw=4 sts=4 et: ************************ //
